Products

We try for excellence, services the customers”, hopes to become the ideal cooperation team and dominator company for staff, suppliers and buyers, realizes value share and continuous marketing for Factory Customized 2000kgs Sliding Gate Motor Automatic Door Operators, We have now experienced manufacturing facilities with more than 100 personnel. So we will guarantee short lead time and good quality assurance.
We try for excellence, services the customers”, hopes to become the ideal cooperation team and dominator company for staff, suppliers and buyers, realizes value share and continuous marketing for China Sliding Door Operator and Gate Opener, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers’ satisfaction and achieve win-win situation .

★ Product Introductions ★

A.Main Process:
open the door→open & slow down→keep in place→ close the door→close & slow down→lock the door.

B.Detailed Work flow :
Step 1: The open signal from external equipment triggers the electromagnetic lock of the door operator to shut down.
Step 2: Open the door . Step 3 : Open & slow down. Step 4: Stop it.
Step 5: Open &hold (permissible time 1 to 99 seconds). Step 6: Close the door (permissible speed 1 to 12 gears ). Step 7: Close & slow down(permissible speed 1 to 10 gears) Step 8: Electromagnetic lock power on.
Step 9: Press door closed.
End of a work flow.

Note: In the process of closing the door, if there is a trigger signal for opening the door, the action of opening the door will be executed immediately.

1). Low consumption, static power ＜2W, maximum power: 50W.
2). Super silence, working noise less than 50 dB.
3).Small size, easy installation.
4).Powerful, maximum push door weight 100 Kg. 5). Support relay signal input.
6). Motor over-current, overload, short-circuit protection.
7). Intelligent resistance, push-door reverse protection.
8).Motor current (thrust), speed accurate regulation.
9).Self-learning limitation, abandoning tedious limitationdebugging. 10). Enclosed shell,rain and dust proof.

★ Installation ★

A.The power supply of the Horizontal Automatic Door Operator is AC 220V,put off the power before installing and live work is strictly prohibited.

B.The Horizontal Automatic Door Operator is suitable for inside room. Installation must be carried out according to the size provided in the instructions. Improper Installation will directly cause the door operator to fail to work properly and damage the equipment in serious cases.

C.During installation, it is forbidden to change the structure of the door operator and no holes can be made in the shell to avoid water and air entering and causing electronic and electrical components failure.

Diagram 2-1(Left /right inside open for push-rod open door)

Diagram 2-2(Left/right outside open for slide-rod open door)

1.Check and ensure the machine is not damaged. And then remove the movable cover on the door opener by pressing. Use the inner hexagonal screw remove the screw that fixes the whole machine and the bottom plate inside.As follows:

2.According to the installation size diagram ,fix the bottom plate of the door operator to the door frame or the wall with the self-tapping screw or expansion screw.
As follows:

3.Hang the host of the door opener on the installed bottom plate through the slot at the bottom of the host, pay attention to the fixed holes on both sides, and fix with the inner hexagon screw removedbefore.
AS follows:

4.Install the connecting rod, pay attention to the direction of the connecting rod. Fixed the connecting rod on the output shaft and door of the reducer with matching M6 screw and tapping screwrespectively.
As follows:

4.Install the connecting rod, pay attention to the direction of the connecting rod. Fixed the connecting rod on the output shaft and door of the reducer with matching M6 screw and tapping screwrespectively.
As follows:

Warning:
A.When the electrical part is connected, live work is strictly prohibited.Power can be energized after all connections .
B.Do not connect the positive and negative poles of the power supply inverse, otherwise the equipment will be damaged.
Note: A. Please choose an electromagnetic lock with supply voltage is 12V DC and the power ≤9W or our company’s electromagnetic lock.Otherwise it will cause abnormal operation or circuit damage.
B: When leaving factory, the motor wire has been connected, do not take it out without any special case.
C: Opening signal of external access control equipment :
① When the access control equipment is the output of switch quantity (dry contact), the close switch controls the opening of the door, and the switch should be open usually, without polarity requirements.
② When voltage output (wet contact), add transfer module.

Connect power supply, electromagnetic lock and external door opening control equipment according to the diagram. After checking ,start the power commissioning.

1.Standby power interface connects 24V standby power supply (standby power supply can be selected without connection according to user’s needs)

2.Infrared photoelectric switch interface (Note: please use NPN normal open type)

3.Access Control machine Connects the control signal of door operator:

The first connection:

The second connection:

Note: All door opening signals should connect to the same point (GNG, NO)

4.Fire signal interface connects fire fighting equipment

5.Two-machine interlocking input/output connection (the master/slave can be determined by setting parameters)

6.Electromagnetic lock interface connecting electromagnetic lock

Horizontal automatic door operator control main board

Horizontal door operator parametric setting handle

Connect parameter setting handle with control main board .After installation and wiring , turn on the power and the door opener will enter the learning state of the closing position (digital tube display“H07”）.
After close and finish learning , it enters the standby state, and the

digital tube displays”_ _ _”in the standby state.

★ Parameter Setting and State Display ★

Function and corresponding digital tube display:

Work Display H01－H09

Work Display E01－E04

★ Debugging ★

A.Normal state: Power on, the digital tube on the circuit board shows “H07″, and the door moves slowly towards closing automatically(in the learning closing position), waiting for the door to close in place and digital display“—”;

B.Abnormal state: Power-on, the door repeatedly switch back andforth,

then set the P15 parameter as 02, when power on again, and then observe whether it enters the normal state A.

C.Abnormal state: Power-on, the digital tube on the circuit board shows “H07″. When the door moves towards opening ,please refer to(3.1) and dial the open direction dial switch(red) on the circuit board to the opposite direction, and then observe whether it enters the normal state A.

Note: please do not block when learning closing position, otherwise the blocking position will be regarded as the closing position!

A.Opening Angle: if the opening Angle is not enough, increase the value of P13; if it is too large, decrease the value of P13 to reach the desired Angle.
B.Opening speed: adjust the value of P10, the larger the value, the faster the speed, the smaller the slower speed.
C.Time of open and hold : When the door open in place, the time of stopping at the position, and adjust the value of P04 (inseconds).

A.Closing speed: Adjust the value of P01, the larger the value, the faster the speed, the smaller the slower;
B: Close-slow Angle: Adjust the value of P05, the larger the value, the larger the Angle, the smaller value the smaller angle.

A: Adjust high-speed current:
Set P06, factory value is 110, that is, set motor working current to 1.10A.
If the motor works abnormally or do not work, the P06 or P19 value must be increased.
If it is blocked or back stepped ,reduce P06 or P19.

B.If the door is not closed in place, increase the value of P19 or P02.
C.If the close buffer speed is too fast, reduce the P02 and P26 or increase P05.
D.Please refer to 3.1 for setting other parameters, it should be according to the situation on site.

★ Common Troubles and Removal ★

We try for excellence, services the customers”, hopes to become the ideal cooperation team and dominator company for staff, suppliers and buyers, realizes value share and continuous marketing for Factory Customized 2000kgs Sliding Gate Motor Automatic Door Operators, We have now experienced manufacturing facilities with more than 100 personnel. So we will guarantee short lead time and good quality assurance.
Factory Customized China Sliding Door Operator and Gate Opener, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers’ satisfaction and achieve win-win situation .